MyPlasm CNC System

Splash screen 868x420 3 01 

3   2

Software Manual EN, PL, ES

Hardware Manual EN, PL

Software Download EN, PL, CZ, ES ( Full Free Version )

 

Proffesional CNC System for Plasma Cutters.

With MyPlasm CNC software is very easy to use and integraded all of functions in one system saves your money.

 

Basic functions of software / controller

- max work area of machine: No limitations

- minimal width of Step pulses: Automatic

- max frequency of STEP signal: 350kHz

       - integrated THC height regulator: Yes

       - THC anti-dive function: Yes

       - material detection: Yes, Touch ( OHMIC ) / Floating head

       - collision switch support: YES

- Accepted file formats: DXF, PLT ( hpgl ), G-Codes (.tap)

       - Integrated CAM module: Yes, MyMini CAM

       - Automatic recognition of internal and external objects: YES

       - Path analysis with lead: YES

       - Cutting parameters base: YES,

       - Correction of project angle for material: YES

       - Operation using GamePad controller: YES

       - Option of cutting from any place: YES

       - Option of cutting from the end: YES

- Applicable CNC controllers: MyPlasm CNC

       - Support for controllers and main boards of other manufacturers: NO

       - Operation through LPT port: NO

Diagram of MyPlasm CNC connections :

 

MyPlasmCNC sch.

 

Example of Plasma Interface connections to CPC port :

MyPlasmCNC PowerMax

 

 

- Import DXF,PLT or G-CODES

- Automatic generate cut path with Offset, LeadIn, LeadOut

- Can be use with extermal CAM software ( sheetcam for example ) 

- Second separate feedrate for small holes

- Parameters Database

- material angle correction

- Soft and Hardware limits

- THC antydive functions

- GamePad stering

- Material Detection via Ohmic Sensor, Floating Head or both !

 

It's very fresh product, is constantly developed.

Every customer will have the option of a free upgrade

What will be in future :

- MyMini CAD

 

Compact THC 150

Plasma Torch Height Controller

 

Attention!

Make sure that the machine is properly grounded. Plasma cutters generate voltage dangerous for human health and life. No grounding may result in electric shock and / or damage electronic equipment

 

User's Guide [EN]

User's Guide [DE]

User's Guide [RU]

User's Guide [ESP]

 

Specyfication:

Model: Compact THC 150

Power supply: 7-35V DC

Outputs: Relay - Up / Down / ArcOk

Range : 30-300V DC (1000 VDC)

Separator HV/HF : Yes

Integrated Voltage Divider: Yes 1:50

 

A popular controller of the plasma torch’s height with a relay outputs Up / Down and ARC OK – a confirmation of the cutting arc.

It is intended to cooperate with CNC control systems, which support THC signals up / down, for example MACH 3, LinuxCNC, CNConv. Thanks to the integration with a voltage divider, the connection is very simple.

Example of connection:

 

 

 

Gecko540 Drive

 

 

If connecting directly to the “power” terminals,

you should ensure the connection as short as possible due to the formation of large disturbances.

 

You should also use test leads with a proper insulation – matched to the maximum voltage of the plasma cutter. Because of the very high level of interferences and voltage “pins”, it is recommended to supply the + and – potential by means of separate wires what minimizes the risk of dielectric breakdown.

 


Exampe how use in LinuxCNC

 

Example of MACH 3 configuration:

 

 

 

Clients example video

 

 

 

 

Compact THC SD (Step Dir PID generator)

 

                             

User's Guide [EN]

      A new generation height controller of plasma torch is based on the popular Compact THC 150 model, in which relay outputs were replaced by inputs / outputs STEP DIR. These inputs / outputs generate corrective signals step/dir proportionally to the slope of the material after the detection of a cutting arc so that the cutting quality is maintained at a very high level.

 

     The connection method of a controller “beyond the software” allows you to use it with the software without the THC function.

 Example of connection :

 

Attention!

Make sure that the machine is properly grounded. Plasma cutters generate voltage dangerous for human health and life. No grounding may result in electric shock and / or damage electronic equipment

 

Specyfication

Model: Compact THC SD

Supply Voltage: 7-35V DC

STEP/DIR Inputs:  TTL 5V

Max. frequency: 0 - 100kHz

Correction frequency: 0 - 5kHz

Range : 30-300V DC (1000 VDC)

Separator HV/HF : Yes

Integrated Voltage Divider: Yes 1:50

 Intended for use with any control system that uses STEP/DIR signals to control the Z axis. Thanks to the integration with a voltage divider, the connection is very simple.

Example of connection:

 

 

 

 

If connecting directly to the “power” terminals,

you should ensure the connection as short as possible due to the formation of large disturbances.

You should also use test leads with a proper insulation – matched to the maximum voltage of the plasma cutter. Because of the very high level of interferences and voltage “pins”, it is recommended to supply the + and – potential by means of separate wires what minimizes the risk of dielectric breakdown.

 

Clients Video