Products

 

Compact THC 150

price: 199USD

compact thc 150

      A popular controller of the plasma torch’s height with a relay outputs Up / Down and ARC OK – a confirmation of the cutting arc. It is intended to cooperate with CNC control systems, which support THC signals up / down, for example MACH 3, LinuxCNC, CNConv.

Thanks to the integration with a voltage divider, the connection is very simple.

 

Compact THC SD

price: 238USD

compact thc 150

     The controller of a new generation based on the THC 150 Compact model with outputs generating signals Step / Dir according to the PID algorithm what provides a very smooth and rapid reaction – the movement speed of the axis is proportional to the slope of a cut material. Step / dir signals are generated during cutting. When the cutting arc is not detected, the device transmits step / dir signals from the control system.

It can be used in 3-axis systems without the THC software function.

 

THC MD + DV

price: 350USD

THC MD + DV

      Alone controller of the Z axis in the plasma torch is integrated with a stepper motor driver. Thanks to the independence from the control system, it can with any CNC system (also biaxial) independently controlling all necessary functions of the Z axis, for example: detection of the material, plasma activation, departure at a cruising altitude, etc.

The device can cooperate practically with any CNC system

 

 

CapTo10

Product Not Available

CapTO10

     A high-class condenser sensor. Popular output signal 0-10V allows for easy use with PLC controllers. The regulator works with any THC regulator from our offer.

 

The main application is to control the height of Oxygen Cutters.

 

CNConv

price: --USD

CNConv

       USB CNC controller – designed for the control of 3-axis machines such as Millers and Engraving Machines. Because the fact that the controller (not a computer) controls the machine, work is very smooth and stable, and the work of a computer / system has no effect on the stability of STEP / DIR signals for third axis. Thanks to the controller, which is integrated in housing of the Ipt connector, the connection is trivially simple – it is connected instead of the LPT cable.

The controller cooperates only with CNConv software.

 

CNConv485

price: --USD

      CNConv controller with an opto-isolated interface USB/RS485 for work in difficult and very difficult environment – for example, in the operation of a plasma cutting machine.

The controller cooperates only with CNConv software.

 

CNConv

freeware

CNConv Software

 

Opto485

price: 59USD

     Opto-isolated interface / USB converter for RS485 designed to cooperation with Proma-Elektronika’s devices. By using a galvanic isolation in both transmission lines and power supply, the computer is fully protected, and the transmission well-protected against interferences.